Products / LED Control Systems

All-in-one LED video controller

NovaStar VX2000 Pro

NovaStar VX2000 Pro all-in-one LED video controller with 20 Ethernet outputs and up to 13 million pixels of loading capacity.

Request a Quote →

Video processing and LED control

The NovaStar VX2000 Pro combines video processing and LED sending in one unit. Its 20 Ethernet outputs support a combined load of up to 13 million pixels. Output scaling and pixel-level calibration help prepare the source for the LED canvas.

Configure it for your display

Choose controller, fiber converter or ByPass mode for your signal path. Configure and operate the device from the front panel or through NovaLCT, Unico and VICP as appropriate to your workflow.

For a quotation, provide the cabinet grid, source formats, per-port mapping and any backup requirements.

Technical specifications

ParameterValue
Maximum pixel capacity13 million pixels
Ethernet outputs20
Maximum output width16384 pixels
Maximum output height8,192 pixels
Maximum video input4K × 2K at 60 Hz
Layers12
Operating modesVideo controller, fiber converter, ByPass
Control optionsFront panel, NovaLCT, Unico and VICP

Maximum width, height and total pixel capacity are separate limits. Check all three for the proposed canvas.

Plan your signal workflow

The VX Pro series combines LED control with video processing, including output scaling, low-latency operation and pixel-level brightness and chroma calibration. Confirm video source formats, receiving-card compatibility and how the screen load will be distributed across ports.

How do I check controller capacity?

Calculate the active pixel dimensions from the cabinet grid. Compare the total pixel count, width and height against the controller limits, then confirm the port map.

Read the LED wall buying guide →

VX Pro model comparison

ModelPixel capacityEthernet outputs
VX400 Pro2.6 million4
VX600 Pro3.9 million6
VX1000 Pro6.5 million10
VX2000 Pro13 million20

Request a controller quote

Send your LED canvas resolution, video inputs and output mapping requirements.

Email BOTH LED →