Die-cast aluminum cabinet
The series sheet lists 500 × 500 mm and 500 × 1000 mm cabinets. Confirm the cabinet mix, wall dimensions and handling requirements before finalizing a layout.

SE · Soft connection
A rental LED cabinet for indoor stages, conferences and exhibitions. Specify the wall around audience sightlines, content and service access.
SE cabinets use separate power and signal jumpers between panels. Crews can route the cables around the wall layout and replace individual jumpers during service. SE is the more budget-friendly option for projects that prioritize cabling flexibility and upfront cost.
Choose RH for a premium cabinet system with direct connections and fewer inter-cabinet cables to troubleshoot.
Compare RH Series →The series sheet lists 500 × 500 mm and 500 × 1000 mm cabinets. Confirm the cabinet mix, wall dimensions and handling requirements before finalizing a layout.
The soft-connection design uses separate power and data connections. Plan jumper routing and include any replacement cables in the spare-parts list.
The shared series sheet lists 900–4500 nits and front IP65 / rear IP54. Ask which brightness and protection values apply to the exact configuration quoted.
Check how presentation text reads from the nearest seats and allow a clear route from the control desk to the wall.
Define how camera feeds and graphics will share the display. Confirm the controller and camera workflow against the quoted configuration.
Plan power and data cable routes before rigging. Allow room for connection points and confirm which cables are included.
The Word specification sheet covers both cabinet sizes and both event environments. Confirm brightness, protection and available pitch for the configuration quoted.
| Parameter | Documented value |
|---|---|
| Pixel Pitch | P1.953 / P2.604 / P2.976 / P3.91 / P4.81mm |
| Pixel Density | 262,974 – 43,222 dots/m² |
| LED Type | SMD1515 / SMD2121 |
| Cabinet Size | 500×500mm / 500×1000mm |
| Refresh Rate | 3840Hz |
| Brightness | 900 – 4500nits |
| Protection Rating | Front IP65 / Rear IP54 |
| Best Viewing Distance | 2m – 50m (model dependent) |
| Input Voltage | AC110V/220V ±10% |
| Average Power Consumption | 300W/m² |
The series sheet lists options from P1.953 through P4.81. Confirm which pitches are offered for this size and installation environment.
Share viewing distance, content resolution and service clearance. Ask for the specified brightness and refresh rate for your application.
Send your target dimensions, venue conditions and delivery date. We’ll use your brief to confirm the product configuration.